Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: East coast window cleaning Services on May 25, 2007, 03:56:11 pm
-
As i bought off a chap on here what goes where (whats feed,waste etc) also whats the other two cannisters for?
As anyone got pics of how they got theres setup?
Cheers Ricky
(http://i37.photobucket.com/albums/e81/rickyuk/Image003-1.jpg)
-
red pipe - supply
black pipe - waste
blue pipe - pure water
the other 2 will either be sediment, carbo or Di filters, and depending what they are depends how you connect them.
unscrew the caps and take a photo of whats inside and i will tell you how to connect it all up.
-
ones empty so i guess there for resin? ??? and the other has a white filter in it ???
-
the packet in front of it, is that a hard cotton filter?
if so it goes inside one of them and gets connected to the supply pipe so the water goes thru that before the merlin.
is there anything else in your kit around the same size as this part?
-
yeah just seen a packet its a pre filter so water goes through that then into the merlin. Mike you got any setup pics?
-
i just tried to ring you but your out, lol.
if the filters supplied are prefilters then you don't need them with a merlin, as the top chamber of the 3 is a prefilter, but if you have it use it as the 10" ones are much cheaper than the merlin ones to replace.
if one of them is indeed a Di filter, then connect this to the pure water pipe to polish the water afterwards.
i don't have a pic set up like this as its not the same setup we use.
Justin.
-
Anyone?
-
Did you buy it from Squeaky Clean? If so give Kev a call!