Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: alireza on May 16, 2007, 10:11:49 am
-
hi i have just gota mytee 1003 dx it works grate and look very Impressive but its a bit difficult to load an un load form my van do you have any idea what to do thanks
-
now theres a question?
-
Havent got a porty my self but i think some guys use a ramp, ive also heard of people taking the motors out (if its modular) to bring the weight down while lifting on and off.
Hope this helps
Dene
-
aluminium ramps off ebay or make some out of ply with a edging strip.
-
In my neck of the woods men are men and can lift those machines in and out of there vans with one hand !! unlike you southan sissies
-
I made a box out of ply and I just lean it back then lift it on to the box then lift it in to the van easy and I Have a ninja and that is heavy it only cost a couple of quid to make and when not in use I store my chems in it.
-
My Rhino is of similar shape and size only heavier I believe, I just tilt backwards until I get the front wheels onto back of van then pull up with handle and push straight in, fairly easy really.
I used to lift straight up but decided against, as its flippin heavy and cant be doing your arms and back any good.
Nigel.
-
I recommend deadlifts, 3 sets of 3 reps 4 times a week and some protien shakes ;)
-
Got these from eBay:
-
In my neck of the woods men are men and can lift those machines in and out of there vans with one hand !! unlike you southan sissies
yep and here in the north east use women lift exles in to caddys with out takeing the paint off the rear bumpers ;D
-
thanks everyone
-
Also, make sure the machine is empty when u lift it. If you have more than a couple of pints of water left in the machine you'll find it impossible.
-
please send me a picture of you box if thts not gonna be a problem thanks