Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: surrey pressure clean on May 02, 2007, 06:12:54 pm
-
hi all
could you please tell me which jets to use on a 20inch flat surface cleaner it is runinng on a honda gda10 diesel engine the pump is a ws201 interpump 15litres a min 200 bar thanks chris
-
probably should use 02 or 025 hope this helps
-
just looking again at your numbers and you might struggle a little bit with the 20 inch version and only 15 litres a minute , it will work but if i was you i would use an 18 inch version
-
I think 20 inch cleaners use 3 nozzles so you will have to divide single nozzle calc by 3 if so
ps just calculated for 1 nozzle ie lance and that should be 06, So a two jet fsc should have 03 nozzles. likewise a 3 jet fsc would need 02 nozzles
-
the flat surface leaner has only 2 jets at the moment i use a tubo on 0.45 jet size i used a 0.5 jet and could not get 200 bar thanks chris
-
I think 20 inch cleaners use 3 nozzles so you will have to divide single nozzle calc by 3 if so
ps just calculated for 1 nozzle ie lance and that should be 06, So a two jet fsc should have 03 nozzles. likewise a 3 jet fsc would need 02 nozzles
Sorry chaps, it must be all this sun. A single lance nozzle onthat pump (ws201) should be 045 so your turbo head is bob on, Based on this then a 2 nozzle fsc should have 02 nozzles in it