Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Alistair@AWC on May 02, 2007, 06:02:53 pm

Title: Merlin Flushing Kit
Post by: Alistair@AWC on May 02, 2007, 06:02:53 pm

Hi Guys,

Sorry to keep banging on but these bloody Merlins..............................................but


Ive opened and set up my newly delivered Flushing Kit and typically its arrived with no instructions, and ive just got a couple of questions

When you fill up the tank do you turn of the water supply when its full and if so how do you know when its full?


When using the Merlin for producing water can the Fushing Tank remain connected as long as its tap is turned off?

Regards

Alistair

Title: Re: Merlin Flushing Kit
Post by: Alistair@AWC on May 02, 2007, 08:16:43 pm

Come on chaps someone out there must have a flushing kit!

Title: Re: Merlin Flushing Kit
Post by: JM123 on May 02, 2007, 11:02:55 pm

its easy to use - firstly, connect to the top port of the merlin,  Once you have that done make sure the valve on top of the flushing kit is open, turn on water supply, make a tank of water, switch off water supply and thats it - it will flush the merlin automatically. 

if your water pressure is low you may need to release some of the pressure from the flushing kit before connecting it up.  run it for a time and while the tank is filling lift the flushing tank to see if there is any water in it - if not let some pressure out - if there is then leave it alone.