Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: johnm on April 25, 2007, 10:42:19 pm

Title: tds reading at 2
Post by: johnm on April 25, 2007, 10:42:19 pm

i have got 200 litres in my 400 litre tank with tds at 2 i need a full tank tomorow should i get up early and change resin ir just fill ??? ???

Title: Re: tds reading at 2
Post by: matt on April 25, 2007, 10:44:47 pm

just fill away, 002 is fine ,

Title: Re: tds reading at 2
Post by: johnm on April 25, 2007, 10:51:29 pm

thanks mat when do you change your resin

Title: Re: tds reading at 2
Post by: macmac on April 25, 2007, 11:39:09 pm

take your DI vessel, give it a good shake up/down, side to side etc for a minute (mix resin up inside).let it settle for 10 minutes, run a few litres of water through it & it will be back to 000tds for a good while. ;)


tony

Title: Re: tds reading at 2
Post by: LWC on April 26, 2007, 07:14:03 am

i "thought" you are ok with anything up to 010 ???

Title: Re: tds reading at 2
Post by: Trevor Knight on April 26, 2007, 07:40:56 am

We operate in desperate circumstances with a TDS reading as high as 15/20 but never any higher.

This is only a result of being stranded miles away from base and needing a couple of hundred litres to finish a job off. Then we direct fill from a supply tap and re-run through the resin. Never had any call backs through spotting.