Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: rob24 on April 12, 2007, 09:33:04 pm

Title: booster pump
Post by: rob24 on April 12, 2007, 09:33:04 pm

 Hi all,

Have a problem with my booster pump that hopefully someone can help with?

Changed over to WFP about a month ago using a 300gpd purefreedom van mount system. Need to produce water quicker as the output is very slow and after reading a previous post i purchased a clarke booster pump from machinemart (which was recomended for a 40/40 system).

The problem is when I connect it up and turn it on the pump runs for a minute and then stops pumping the water through. It still has power to it and when I disconnect the hose from the RO the pump kicks in again continously.

Do you think this pump is not compatable or is there some sort of pressure/flow switch that may need adjusting

Thanks,

Rob

Title: Re: booster pump
Post by: JM123 on April 12, 2007, 09:50:45 pm

the pump is not compatible.  try ro-man for a suitable booster pump.

the clarke is a hig flow pump, without an ro capable of allowing a high flow then he pressure builds up and the pump will switch off.

Title: Re: booster pump
Post by: rob24 on April 12, 2007, 10:23:42 pm

Thanks for that.