Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Moderator David@stives on April 12, 2007, 06:05:29 pm

Title: Alex G
Post by: Moderator David@stives on April 12, 2007, 06:05:29 pm

Alex

How much would you have quoted for that job we spoke about ?

85 windows thats including about 20 tiny bathroom windows

Dave

Title: Re: Alex G
Post by: Alex Gardiner on April 12, 2007, 06:35:26 pm

I'll pop by and have a professional look tomorrow and let you know straight away. :)

Title: Re: Alex G
Post by: poleman on April 12, 2007, 08:19:25 pm

Dave sorry to jump on your post (for give me)

Alex

I purchased a submersible pump from you and just about to connect the Delivery hose for submersible pump, does this need a stainless steel hose clamps! would this rust (pure water) or can it just be pushed on with out any clamping!

Andy
PS again sorry for jumping on your post Dave  :)

Title: Re: Alex G
Post by: Alex Gardiner on April 12, 2007, 08:27:34 pm

I'm sure Dave will forgive you, he's that kind of guy!

I would recommend fitting a stainless steel Jubilee clip as it will be a pain to get to if it ever works it way off.

Title: Re: Alex G
Post by: poleman on April 12, 2007, 08:47:04 pm

OK big thank you, I am off to http://www.hyphose.com/ in the morning for other connectors, so I will put this on my list, also the 70 LPM Booster Pump
I purchased from you, will it turn it self off when my IBC tank is full or should a put it on a timer switch at the electric mains

Andy
PS that was my last question  :-X 

Title: Re: Alex G
Post by: Alex Gardiner on April 12, 2007, 08:59:19 pm

It is specified with a an inbuilt pressure switch, but as it will be connected to an RO system I would imagine that it would not activate properly unless you had an Ro with full waste cut-off (Merlin, etc). The best way is to try it out and if it doesn't then a timer would be a sensible option.

Title: Re: Alex G
Post by: poleman on April 12, 2007, 09:23:07 pm

YES I have a Merlin (Purchased from you) so thats good news  ;)

Again, thank you Dave. I would quote £120  ;)

Andy

Title: Re: Alex G
Post by: Kirsty Gardiner on April 13, 2007, 10:12:26 pm

Hi Dave, 

Just wanted to let you know that Alex has been ill today - or I know he would have had a look at that job for you.  I'm sure he'll be in touch as soon as he's up and about again.  I didn't want you to think he'd forgotten!

Regards

Kirsty

Title: Re: Alex G
Post by: poleman on April 14, 2007, 01:05:52 pm

Alex the 70 LPM Booster Pump I purchaesd of you, I am just about to install, however there is to holes! one for in and one for out! (ie top or side) which one is which! did look in the paper work it came with and for the life of me cant see anything  :-\

Andy

Title: Re: Alex G
Post by: sair on April 14, 2007, 01:10:01 pm

hi andy

if its the style i think then the inlet is the side and external is the top

but i could be wrong but the manual will say

Title: Re: Alex G
Post by: Alex Gardiner on April 14, 2007, 02:25:57 pm

Hi Andy

Inlet on the side, outlet on the top.

Title: Re: Alex G
Post by: poleman on April 14, 2007, 03:16:19 pm

TOP BLOKE  ;) will be trying out my whole static system with in the next 2 hours

Andy 

Title: Re: Alex G
Post by: poleman on April 15, 2007, 09:46:56 am

Hi Alex, connected every thing up, fill the whole system with water, the pump kicked in for 5 secs and then STOP  :-\ checked fuses, everything!

I am not sure what to do, as my pressure is low (30psi) and need to fill up for work  :'(

Andy

Title: Re: Alex G
Post by: Alex Gardiner on April 15, 2007, 09:58:16 am

Hi Andy

There are several things we could do to try and find the problem.

The easiest way is to email me your phone number and I will call you right back.

Use the email address on my profile.

Title: Re: Alex G
Post by: poleman on April 15, 2007, 10:17:50 am

Just sent you a e-mail, speak at 11am  ;)

Andy

Title: Re: Alex G
Post by: Alex Gardiner on April 15, 2007, 10:54:22 am

Hi Andy,

not got your email yet, try sending it to alex@agardiner.co.uk

Title: Re: Alex G
Post by: Alex Gardiner on April 15, 2007, 11:25:11 am

Hi Andy,

still got no email from you. :(

Title: Re: Alex G
Post by: Moderator David@stives on April 15, 2007, 12:54:55 pm

Alex

you got mail

Title: Re: Alex G
Post by: Alex Gardiner on April 15, 2007, 01:02:59 pm

Thanks Dave

Title: Re: Alex G
Post by: poleman on April 15, 2007, 09:38:44 pm

Alex thanks for your help today, just sent you a e-mail

Andy