Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: Jet Cleanse Ltd on April 12, 2007, 03:11:14 pm

Title: Surface Cleaning Preparation
Post by: Jet Cleanse Ltd on April 12, 2007, 03:11:14 pm

Hi,

I am now in a position to start cleaning hard surfaces (drives/patios) and would like some advice on what prep work may be required i.e weedkilling, stain removal and how people go about it and what they use?

Thanks for your help

Arran

Title: Re: Surface Cleaning Preparation
Post by: BDCS on April 12, 2007, 09:56:13 pm

You have mail

Title: Re: Surface Cleaning Preparation
Post by: Jet Cleanse Ltd on April 13, 2007, 06:06:17 pm

Thanks for the info

Title: Re: Surface Cleaning Preparation
Post by: steve k on April 13, 2007, 06:08:48 pm

could I have some of that info please...maybe post it up on the forum ;)

Title: Re: Surface Cleaning Preparation
Post by: Allways Cleaning on April 15, 2007, 09:24:17 pm

May I trouble you for this information as well too please.
Kind Regards
Paul

Title: Re: Surface Cleaning Preparation
Post by: Craig Wilson on April 16, 2007, 07:54:26 am

Could I have that information too please.

Title: Re: Surface Cleaning Preparation
Post by: Jet Cleanse Ltd on April 16, 2007, 06:16:20 pm

Sorry if this has been built up a bit, the information I got was

1) quote the customer based on size of job or day rate
2) spray weedkiller if quote accepted and the leave
3) clean oil/stains with degreaser or light tfr
4) Make clean the area after washing
5) Kiln dried sand in the joints

Hope thats the information you required although I am sure everybody has there own ways of working.

Arran

Title: Re: Surface Cleaning Preparation
Post by: Allways Cleaning on April 17, 2007, 10:14:17 am

Thank you for posting the reply, all information is useful and it gives a different perspective on how things can be done. Allways useful.
Regards
Paul