Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: mark_roberts on August 26, 2004, 10:46:31 pm

Title: Flow rate of portable
Post by: mark_roberts on August 26, 2004, 10:46:31 pm
Anyone know the flow rate of a 100psi pump ie. from pump into bucket inside 1 minute.

Is it possible for it to fall over time as mine felt a bit weak today.

thanks
Mark
Title: Re: Flow rate of portable
Post by: conallon on August 26, 2004, 10:58:26 pm
hi mark
           dont know flow rate but been having similiar problem, put it down to solution hose, got one new 15.0 mt, pressure fine, one old 7.5 mt difference is well noticable, probably limed up some were - hose, pump or plumbing

                             Conrad
Title: Re: Flow rate of portable
Post by: paul@ctcs on August 27, 2004, 12:05:35 am
Mark,
Pop the jets and filters out of the wand and check for debris, I've had a similar problem and this was the cause.

Paul
Title: Re: Flow rate of portable
Post by: Dennis on August 27, 2004, 12:27:02 am
Shurflo 100psi open flow 5 litres per minute.

http://www.williamsonpumps.co.uk/SHURFLOSPEC.pdf