Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: chris@c.m.s on April 03, 2007, 07:10:58 pm

Title: Ro help
Post by: chris@c.m.s on April 03, 2007, 07:10:58 pm

My RO-man 4040 arrived today its all plumbed in and so far I've had to put right 2 leaks I've now found another, worrying as its only showing an inlet pressure of 20 psi  ??? anyway it has a leak at the base of the membrane, is there an easy way of sorting it or should it be sent back, I'd really like to be able to sort it myself so I can produce asap.    (http://i174.photobucket.com/albums/w119/chris3381/RObase.jpg)

Title: Re: Ro help
Post by: NWH on April 03, 2007, 07:15:49 pm

Chris have you got a booster pump.

Title: Re: Ro help
Post by: chris@c.m.s on April 03, 2007, 07:19:34 pm

No not yet looks like I may have to though tested my pressure the other week though and it was 55psi so its all very strange.

Title: Re: Ro help
Post by: NWH on April 03, 2007, 07:22:04 pm

You will need a booster pump,i have a similar RO and when the booster pump went i could have peed quicker than it was filling without one.

Title: Re: Ro help
Post by: chris@c.m.s on April 03, 2007, 07:23:38 pm

Thanks I'll get one on order 

Title: Re: Ro help
Post by: Alex Gardiner on April 03, 2007, 07:54:46 pm

It is probably showing only 20psi because of the leak.

Title: Re: Ro help
Post by: chris@c.m.s on April 03, 2007, 08:20:52 pm

Yep thanks Alex I think that is the case, I just checked the pressure on my other gauge and it reads nearly 60 psi.