Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: andrew.ralph@homec on March 25, 2007, 12:04:29 pm

Title: WFP SPOTS
Post by: andrew.ralph@homec on March 25, 2007, 12:04:29 pm

HI ALL DONE MY OWN WINDOWS YESTERDAY FOR THE FIRST TIME WFP NORMALLY TRAD AND STILL GOT SPOTS ON THIS MORNING ANY HELP PLEASE AND HOW LONG SHOULD THEY TAKE TO DRY  CHEERS ANDY

Title: Re: WFP SPOTS
Post by: TERRY AB on March 25, 2007, 01:47:02 pm

HI Andrew,
Did you do your windows 1st time or use your system 1st time.
If latter, then it could be that your Brushes arent 100% free from
inpurities, have you also checked the TFDS reading of the water
coming out of the Brus jets (Because sometimes new Hoses also
are not 100% at the beginning). Also the first 2 to 3 minutes of water
going thru your Hoses at the beginning of work will have a higher TDS
reading, due to the Water standing in the Hose overnight.
Otherwise if your TDS readings are OK then it must be that you did not wash
the Frames and Glass intensively enought. Also some Glass have a build
up of Limescale which will only be removed after a few cleans.
Just give them another Clean and then check the result.
How quick the windows dry depends of temperarture and wind strength.
No wind and cold anything upto 30 minutes, but you will be able after 10 minutes be able to se  whether any spotting is occuring; just check the dry areas for Spots!.
Terry

Title: Re: WFP SPOTS
Post by: andrew.ralph@homec on March 25, 2007, 08:33:03 pm

HI TERRY NEW SYSTEM AND ONLY HAD A COUPLE OF GOES BEFORE WILL CHECK TDS CHEERS ANDY