Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: batterbee on February 17, 2007, 12:16:22 pm

Title: Wiring up an Eco- Flow
Post by: batterbee on February 17, 2007, 12:16:22 pm

Hi all

This question is for anyone who has wired up an Eco-flow controller to a 100psi shurflo pump.

In the wiring instructions it states fitting the + & - wires to the pump, but is that to the + & - of the pressure switch or the + & - of the wires coming out from the bottom of the pump.

Any help on this will be very much appreciated.

Kind regards

John

Title: Re: Wiring up an Eco- Flow
Post by: jeff1 on February 17, 2007, 01:27:55 pm

Quote from: batterbee on February 17, 2007, 12:16:22 pm

Hi all

This question is for anyone who has wired up an Eco-flow controller to a 100psi shurflo pump.

In the wiring instructions it states fitting the + & - wires to the pump, but is that to the + & - of the pressure switch or the + & - of the wires coming out from the bottom of the pump.

Any help on this will be very much appreciated.

Kind regards

John

John not 100% sure on the eco-flow, but with the varistream you do away with the pressure switch, and I am almost certain it will be the same with the eco-flow, wire it directly to you pump, you won't do any damage. the eco-flow is a replacement for your pressure switch.

Title: Re: Wiring up an Eco- Flow
Post by: jeff1 on February 17, 2007, 06:26:30 pm

I have since found out that you do need to keep your pressure switch.

Title: Re: Wiring up an Eco- Flow
Post by: batterbee on February 17, 2007, 07:30:54 pm

Hi Jeff, thanks for your help, after talking to supplier i have now sorted it out and all is working well.

John