Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: darren_smart on February 12, 2007, 07:09:36 pm
-
Can anyone help...ive hardly used my omnitrolley ,but switch it on and ......nothing... battery charged + all
connections secure .... could it be the pressure switch ,as today it got accidently switched on and left for 20 mins when it was empty.............
HELP PLEASE ... Darren ???
-
pumps could be damaged if you have run it dry.
-
Any one else got any suggestions .........???? desperate ...as also just dropped backback and put hole in
the bottom........... this is not my day !!!!!!!!! >:(
-
I have omnitrolley switch went on me .I wired the pump direct to battery thats how I found out it was the switch.
al
-
which trolley have you got and is the pump still makeing a noise ?
-
ITS THE CLASSIC 50 DI... OCCASIONALLY MAKES NOISE VERY BRIEFLY AS IF TO START...THEN NOTHING
-
GREAT... wired direct to battery and pump runs... its the switch !.. not so expensive ;D and managed
to mend backpack... so things are looking up ....and i'll sleep tonight ......
THANKYOU !!
-
great
al
-
maplins do the switches
al
-
Cheers again
Darren
-
do you have the pole plugged into the waterstop connector?
the pump wont switch on if you havn't.
-
sorted justin... but could you help with another issue.. on my trolley i have standard endstop i want to connect micro bore hose and poles with micro bore fittings... is there an adaptor ? or microbore endstop or even microbore male to standard male !!!to connect both endstops ????