Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: aztec on February 10, 2007, 09:28:36 pm

Title: how often
Post by: aztec on February 10, 2007, 09:28:36 pm

hi people

how often do you have to change your resin, it gets pretty expensive sometimes when using my tucker pole system and 2 d i bottles
 sometimes a change is needed twice weekly, any cheaper options available????

Title: Re: how often
Post by: Russell Macdonald on February 10, 2007, 09:51:00 pm

Hi Aztec.

I run a Tucker van mount. I live in a hard water area so i have a 650ltr stactic with RO MAN 300gpd. My whole ro set up including transfer pump & hose was £619.05 from Gardiners, 01726 61143, that was on 18 May last year. I'm still getting 000ppm on original di after 15 months, the first few months a mate let me fill up till i was sorted.

Macc

Title: Re: how often
Post by: aztec on February 10, 2007, 10:42:15 pm

thanks macc i needed some help

Title: Re: how often
Post by: macmac on February 10, 2007, 11:33:22 pm

aztec
when your water tds starts to read above 001 take the di vessels out of the van, put a stop connector on each end & give them a good shake, turning them upside down as you go. do this for about a minute or two to really mix the resin up inside, then let them settle for a short while, run a few litres of water through & you'll be back to tds 000 again. ;)

tony