Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: aztec on February 03, 2007, 06:46:29 pm

Title: question for gaz h20
Post by: aztec on February 03, 2007, 06:46:29 pm: hi mate

i have an unger hiflo carbon tec pole and the brush is rubbish!

have your brushes got two screwholes and jets that i could screw onto my existing gooseneck?

could you do a bit of research and get back to me please i have heard some good things about your brushes!!!
Title: Re: question for gaz h20
Post by: aztec on February 04, 2007, 12:30:59 pm: where are you gaz
Title: Re: question for gaz h20
Post by: H h20 on February 04, 2007, 07:13:05 pm: Sorry i`m in the middle of decorating :-\,i`ve just nipped on to have a min,i`ll get round to it asap,
Gaz ;)
Title: Re: question for gaz h20
Post by: aztec on February 05, 2007, 12:40:18 pm: gaz the gooseneck is all one and welded to the screw thread if you see what i mean, as long as your brushes have two holes for screws and jets they would be fine any chance of a close up picture of one of yours to see please mate
Title: Re: question for gaz h20
Post by: H h20 on February 05, 2007, 02:01:11 pm: Yes,i have looked at the Unger brush and gooseneck fitting and it will be easy enough to do,
Gaz
Title: Re: question for gaz h20
Post by: Davew on February 05, 2007, 03:17:44 pm: Gaz do you have anything similar or even better than a Vikan sill brush? (have emailed you too). Davew
Title: Re: question for gaz h20
Post by: aztec on February 05, 2007, 04:05:34 pm: could you send me 2 12" brushes with details on how to pay then please mate

38a church street
boughton monchelsea
maidstone
kent
me174hw
Title: Re: question for gaz h20
Post by: H h20 on February 05, 2007, 05:56:31 pm: Quote from: aztec on February 05, 2007, 04:05:34 pm
could you send me 2 12" brushes with details on how to pay then please mate

38a church street
boughton monchelsea
maidstone
kent
me174hw

Hi Lee,
you got email,
Gaz
Title: Re: question for gaz h20
Post by: ScrimShady on February 05, 2007, 08:57:19 pm: i will have some prices aswell gaz please, my brushes need replacing
Thanks
Title: Re: question for gaz h20
Post by: aztec on February 05, 2007, 11:25:28 pm: thanks for your reply mate the cheque is in the post
Title: Re: question for gaz h20
Post by: Clear Vision on February 06, 2007, 08:55:21 am: Gaz,

Can your brushes fit my vikan elbow?

If it can I will take a few ;)

Matthew
Title: Re: question for gaz h20
Post by: H h20 on February 06, 2007, 05:16:45 pm: Quote from: Clear Vision on February 06, 2007, 08:55:21 am
Gaz,

Can your brushes fit my vikan elbow?

If it can I will take a few ;)

Matthew

Hi Matt,yes they do mate the latest brushes are excellent,
Gaz
Title: Re: question for gaz h20
Post by: Clear Vision on February 06, 2007, 09:16:27 pm: Hi gaz,

Are you sure they will fit? Do they screw on or push fit onto my vikan?

Here is a couple of pics of my vikan elbow.

P.S. I drilled a 6.5 mm hole and fitted the jets but they were a bit loose? I think a 6mm would be better!

Matthew
Clear Vision
Title: Re: question for gaz h20
Post by: aztec on February 08, 2007, 05:46:37 pm: did you get my cheque gaz
Title: Re: question for gaz h20
Post by: aztec on February 08, 2007, 09:57:12 pm: Gaz are you there mate wondered if you recieved my cheque for the 2 brushes
Title: Re: question for gaz h20
Post by: aztec on February 15, 2007, 07:00:36 pm: GAZ

I received the two broom heads today i bought from you OH SORRY YOU CALL THEM BRUSHES!

WHAT DO YOU TAKE ME FOR!!

19 QUID FOR TWO BROOM HEADS GIVE ME A BREAK they are on their way back as we speak

please inform buyers that they are not used for poles but for sweeping floors
Title: Re: question for gaz h20
Post by: H h20 on February 15, 2007, 07:18:52 pm: Quote from: aztec on February 15, 2007, 07:00:36 pm
GAZ

I received the two broom heads today i bought from you OH SORRY YOU CALL THEM BRUSHES!

WHAT DO YOU TAKE ME FOR!!

19 QUID FOR TWO BROOM HEADS GIVE ME A BREAK they are on their way back as we speak

please inform buyers that they are not used for poles but for sweeping floors

Hi Lee,no problem refund will be made for the price of the brushes,
i have used them for 2 years for wfp not sweeping floors,a lot of people on here use brushes bought from tesco,asda,wilkinsons etc and convert them,i don`t see the problem,carbon fishing poles are being used for wfp i do`t see the problem,
well known wfp suppliers are using floor sweeping brooms and converting them i don`t see the problem,
they do the job and do the job right i don`t see the problem,
but like i already wrote you will get a refund if it`s not what you want,
Gaz
Title: Re: question for gaz h20
Post by: david wood on February 15, 2007, 07:36:09 pm: ive been really happy with these brushes ive never had any problams .i cant imagine useing a vican brush again i find them to heavy seem to leave spots and no swivel .i think ial stick to a gaz brush
Title: Re: question for gaz h20
Post by: Bazzy1999 on February 15, 2007, 07:47:07 pm: Im with Woods_windows on this one i think they are great and yes we all know they are ment for sweeping floors but they are better for cleaning windows........
Lots of people have the Vikan brush but it wasn't designed for window cleaning.

Bazz...
Title: Re: question for gaz h20
Post by: H h20 on February 15, 2007, 07:55:50 pm: Thanks Dave and Bazz,there a few different brushes i supply and Lee chose a particular one as the pole stock can be cut off as he wanted to fit it to a fixed head for a gooseneck,the ones you have Bazz are a much better brush and as you say they do a much better good job,
Gaz
Title: Re: question for gaz h20
Post by: Ladders on February 15, 2007, 10:25:34 pm: Gaz hi
I have had 2 brushes of you in the past the blue ones when you first started selling them.

I still use these brushes to this day and find them excellent brushes.

The only criticism i could make would be about the plastic jets, but hey you get what you pay for.

PRICE WAS RIGHT AND IT STILL DOES THE JOB.

Cheers Jeff ;)