Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: johnm on January 28, 2007, 10:15:53 pm
-
how do you stop water running without runing back to van
-
i put a switch on my pole it stops the water between every window i can also control the flow at the pole.i use fan jets but if i need to be accurate i can turn the flow down so they turn into pencil jets, the switches came from varitech, they are fron microbore then to standard hoselock fittings
-
do you have a photo how much were they
-
can txt u a foto if u like the omly down side is when i need to change my pole it means putting new cable ties on switch
-
Copy this on the link below.
http://www.cleanitup.co.uk/smf/index.php?topic=31404.0#msg244381
-
We sell them as pole control valves. A must have for anyones system.
-
how do you stop water running without runing back to van
Another way is to put a hoselock style flow control fitting on the end of the hosereel. They tend to be plastic though and can get broken. Some people put the hose through a tennis ball and the flow control next to that so it's better protected.
-
Hi John, there is also an automatic brush http://www.window-tools.com/auto.htm or if you use soft thinwall pvc or silicon pipe you just fold it in half anywhere along its length.
-
I use a flexible pole hose, just fold it in two and slip a ring over it. The ring is tied to the pole with thin bungy, and is always in the same place at any working height.
This is a great system for anyone with hose running outside the pole. Dai