Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: AuRavelling79 on January 08, 2007, 05:11:11 pm

Title: Help needed to decide which pole to get - please.
Post by: AuRavelling79 on January 08, 2007, 05:11:11 pm

I've got one of those Unger poles like the one Ian Giles uses (green twisty locking devices) and it's done well over my first two years of wfp but it's a bit whippy at second floor height and over conservatories.

Most of my work is ground and first floor and a little bit second floor. (Which I may take a bit more of but don't see myself going any higher.)

I'm thinking of replacing my pole but I work like this:

Hose up the outside of the pole so I can unclip the brush and put it on my short pole for downstairs. (which is a cut down top section of the unger, about 2ft long and carried in my belt)

Is there a lighter hard wearing pole that is more rigid and that will let me unclip the top section to use as a downstairs pole?

Help please and thanks in anticipation.

Title: Re: Help needed to decide which pole to get - please.
Post by: H h20 on January 08, 2007, 07:00:40 pm

Malc,the facelift pole is able to be taken apart,they are available in fibreglass and carbon,i think the fibreglass is available in smaller sizes,
Gaz

Title: Re: Help needed to decide which pole to get - please.
Post by: seanmcshane on January 08, 2007, 07:31:16 pm

I was wondering if there is a supplier who supplies poles with detachable, click on - click off brush heads similar to powerpoles?

Title: Re: Help needed to decide which pole to get - please.
Post by: AuRavelling79 on January 08, 2007, 10:57:22 pm

So what adaptor would I use/make to connect my brush assembly (which ends in an unger sprung clip fitting) to the new pole?