Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: gmccleaning on January 04, 2007, 12:26:35 am
-
ive got a prochem steameasy 400 (70psi pump & 1200 2 stage vac) how much hose could i work with ,
thanks george
-
I would guess 5o ft...not sure..
-
imo
i wouldnt use any more than 25ft.......................
the machine has very low pressure..............
i dont think that u would get much water lift after the clean!
but there are many better informed people on here who may express an opinion!
-
I have been using that machine for 15 years now and have nothing but praise for it.
I use 25ft for normal jobs but use 50ft if working upstairs.
Its a very good machine very light and simple to use i have had NO trouble with drying time also i use just one jet on the wand get fantastic results.
-
I use 25ft but may try 50, too heavy to carry upstairs. Never had any probs with drying times and great results.
Need to give it a service tomorrow, any tips?
-
Hi
I had one for many years & would run 50 ft max with the aid of a turbo dryer.
Dave
-
Replace bushes in vac motor.
-
Ta mate, will take a look now. Where can i get the brushes? Also what do you do to keep th epump pumping 100%?
-
They are a pain to empty the waste, the tap is about 2 inches above the bottom. Need to tip and wobble it and still not completely empty.. :-[
-
Just tip a few buckets of cold water in there when you're done, an flush it out.