Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jeff1 on December 02, 2006, 08:20:29 pm

Title: Di Vessel
Post by: jeff1 on December 02, 2006, 08:20:29 pm

Hi Guy's

Can anyone give me a bit of advice on the best Di vessel to buy?  I was looking at the 11ltr one, but then I seen the 10'' plastic one, just need it to fit on a 200gpd Ro-unit.

Thanks Guy's

Title: Re: Di Vessel
Post by: david wood on December 03, 2006, 07:22:20 am

any of them will do jeff but you will be changing the resin more in the smaller 1

Title: Re: Di Vessel
Post by: jeff1 on December 03, 2006, 08:13:02 am

Many thanks,

I think I will have to take a TDS reading first to see what it is, if it comes out the RO- pretty low then I think the small one will be ok, but like you said I will have to change resin more often.

Title: Re: Di Vessel
Post by: edd on December 03, 2006, 08:11:27 pm

we fitted a 25 ltr one fit and forget for 2 years really

Title: Re: Di Vessel
Post by: jeff1 on December 03, 2006, 09:50:02 pm

Quote from: v8edd on December 03, 2006, 08:11:27 pm

we fitted a 25 ltr one fit and forget for 2 years really

What is your TDS reading out of the Tap?

Title: Re: Di Vessel
Post by: edd on December 12, 2006, 07:59:30 pm

330tds

Title: Re: Di Vessel
Post by: jeff1 on December 12, 2006, 10:42:14 pm

Just been able to take my TDS reading and it is 130ppm

Title: Re: Di Vessel
Post by: paul mather on December 13, 2006, 11:15:27 pm

Quote from: woods_windows on December 03, 2006, 07:22:20 am

any of them will do jeff but you will be changing the resin more in the smaller 1

Thats what I thought until I uped my water pressure with a booster pump, just changed my resin after about 11 weeks, it was still only at 2 but as I was changing my filters thought I would have a fresh start.

Oh my cannister is only 250 mil.

Title: Re: Di Vessel
Post by: H h20 on December 14, 2006, 07:39:33 am

Hi Jeff,if you are after something affordable i recon this is,Gaz  ;)
http://cgi.ebay.co.uk/di-filter-window-cleaning-compositve-vessel_W0QQitemZ150068545972QQihZ005QQcategoryZ112579QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Title: Re: Di Vessel
Post by: jeff1 on December 14, 2006, 08:40:16 am

Quote from: Gaz Hh20 on December 14, 2006, 07:39:33 am

Hi Jeff,if you are after something affordable i recon this is,Gaz  ;)
http://cgi.ebay.co.uk/di-filter-window-cleaning-compositve-vessel_W0QQitemZ150068545972QQihZ005QQcategoryZ112579QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Now thats what I call cheap Gaz! over £50 savings is a bargain.

Title: Re: Di Vessel
Post by: macmac on December 14, 2006, 11:23:26 pm

cleantech do reconditioned ones for about 50 quid (empty, no resin) i had one from them and its just as good as new.  ;)

Title: Re: Di Vessel
Post by: pjulk on December 14, 2006, 11:46:28 pm

I have one of the 10" plastic ones and i change the resin every couple of weeks.

Paul

Title: Re: Di Vessel
Post by: Clear Vision on December 22, 2006, 11:57:31 pm

Quote from: macmac on December 14, 2006, 11:23:26 pm

cleantech do reconditioned ones for about 50 quid (empty, no resin) i had one from them and its just as good as new.  ;)

Wrong ;D ;D

They fill mine for £50  ;D

Title: Re: Di Vessel
Post by: DASERVICES on December 23, 2006, 09:21:03 am

Gaz, do you know who is selling this. Reason asking I can see from the picture they have a DIY hot water set up. Any ideas what was used and set up.

Thanks

Doug

Title: Re: Di Vessel
Post by: H h20 on December 23, 2006, 09:55:58 am

Quote from: D.A. Services on December 23, 2006, 09:21:03 am

Gaz, do you know who is selling this. Reason asking I can see from the picture they have a DIY hot water set up. Any ideas what was used and set up.

Thanks

Doug

Hi Doug,you could always try to email him using the ebay link.but it looks like he`s using on of these,
http://www.bc4x4.com/quick/2001/hottap/
Gaz  ;)

Title: Re: Di Vessel
Post by: JM123 on December 23, 2006, 10:45:38 am

I think he is using the Zodi Hot YTap Pro 70  look here http://www.gearforcamping.com/Zodi-Pro-70-Hot-Tap-shower-p/5150.htm

Title: Re: Di Vessel
Post by: matt on December 23, 2006, 11:43:23 am

i used to use a 250 ml cylinder ( the blue 1 ontop of RO-MAN's units) i would change it every few months, i then needed to bulk up a order to get free delivery so i ordered a this

http://www.ro-man.com/shop/product_info.php/cPath/33/products_id/98

it normally last me best part of the year
my tap is 470 and it come sout of my ro at about  006, so the DI doesnt have to do too much work

i give it a shake every few months and its good again