Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Paul Simpson on November 25, 2006, 12:47:54 am

Title: Hand Tool Trigger
Post by: Paul Simpson on November 25, 2006, 12:47:54 am

Hi all, I'm after a new trigger mechanism for my hand tool but don't seem to be having much luck in finding one. I've checked in plumbers merchants, DIY store and also online but no joy.
Anyone know anywhere that does hand tool spares?
Same as one pictured.

Title: Re: Hand Tool Trigger
Post by: carpetclean on November 25, 2006, 07:51:09 am

try woodbridge they should stock spares

Title: Re: Hand Tool Trigger
Post by: Paul Simpson on November 25, 2006, 10:06:06 am

Tried them already, their website at least, they do have some hand tool trigger assembly but couldn't see one that matched mine.
 :-\

Title: Re: Hand Tool Trigger
Post by: Clear Vision on November 25, 2006, 10:30:04 am

http://www.worldofclean.co.uk/index.php?productID=338

Try that!

matthew

Title: Re: Hand Tool Trigger
Post by: Clear Vision on November 25, 2006, 10:35:01 am

Whoops  :-[

just noticed the one link I posted is different to yours! Sorry.

But they might have another one? I never had a propper look.

Title: Re: Hand Tool Trigger
Post by: ROSINA INVESTMENTS LIMITED on November 25, 2006, 10:48:38 am

For what they cost, why not just invest in a new one? You must have earnt your money out of that one several times over.

Title: Re: Hand Tool Trigger
Post by: rambly on November 25, 2006, 11:37:10 am

This one is supplied by Ashbys and looks very similar.

Title: Re: Hand Tool Trigger
Post by: Paul Simpson on November 25, 2006, 02:06:33 pm

The Ashby's one seems to be the one I'm after so thanks Rambly, will give them a call.
Thanks to everyone else for the replies.

Title: Re: Hand Tool Trigger
Post by: the red carpet on November 25, 2006, 09:17:33 pm

Woodbridge well worth a call, i bet they do it and if they do i bet there the cheapest supplier

Title: Re: Hand Tool Trigger
Post by: rambly on November 26, 2006, 12:46:53 pm

Paul. It would be interesting to see learn how you got on and who you found gave the best price/sevice.

It is fairly easy to do price comparisons on consumables but service parts like leaky valves are not so simple to find on-line.

Title: Re: Hand Tool Trigger
Post by: Ian Puckett on November 26, 2006, 03:48:13 pm

http://www.worldofclean.co.uk/index.php?productID=365

(http://www.worldofclean.co.uk/products_pictures/offset2.jpg)

other from that sight is for wand

Title: Re: Hand Tool Trigger
Post by: Mike Halliday on November 26, 2006, 03:54:43 pm

NO!!! that is not a match!!! it has no indents for the bracket to close into

Mike

Title: Re: Hand Tool Trigger
Post by: Ian Puckett on November 27, 2006, 04:43:26 pm

Quote from: mike_halliday on November 26, 2006, 03:54:43 pm

NO!!! that is not a match!!! it has no indents for the bracket to close into

Mike

Dont need dents- comes with braket

"This valve comes standard with the detail tools. The body is made from forged brass and the handle is stainless steel. It has the "soft opening" feature and has been tested at pressures over 1000. The valve has an inlet and outlet of 1/8" FNPT. This valve comes with a bracket and retrofits wands and other tools with 1 1/2" tubes. The seal for this valve is Teflon and can be repaired easily. Water Temp 240° F Rated PSI 1000 Weight .5 Lbs Material Forged Brass"

Title: Re: Hand Tool Trigger
Post by: Mike Halliday on November 27, 2006, 06:08:37 pm

sorry my mistake :-\

 didn't realise it came with the bracket. thought it was as shown.

and its only £18!!! a very good buy

Mike