Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: top rung on October 30, 2006, 07:59:26 pm

Title: varistream
Post by: top rung on October 30, 2006, 07:59:26 pm

Just changed my hoses for microbore hose,iam still getting water up to the brush,but cant turn pressure up very high as the varistream cuts pump off.Can you please tell me how to adjust the controller. thanks

Title: Re: varistream
Post by: dai on October 30, 2006, 08:05:31 pm

Top rung, unscrew the 4 screws on the front of the VARISTREAM, and you can then remove the front bit. Inside you will see a small blue dial with letter increments. Move it clockwise one increment at a time untill you are happy with the cut off pressure. Dai

Title: Re: varistream
Post by: top rung on October 30, 2006, 08:14:07 pm

thanks for that Dai and are you sure its anticlockwise.

Title: Re: varistream
Post by: dai on October 30, 2006, 08:28:32 pm

I said clockwise, I had to turn mine down, anticlockwise as I was getting too much pressure causing leaks before it would switch the pump off.
It seems to have done the trick, so if you want more pressure turn it clockwise. Anyway you will soon know if you have turned it the wrong way
as it would cut out even sooner. Dai

Title: Re: varistream
Post by: top rung on October 30, 2006, 10:09:40 pm

Thanks dai

Title: Re: varistream
Post by: jeff1 on October 30, 2006, 10:10:33 pm

Nice clear pictures of the varistream adjustment on this link

http://www.w.com/html/modules.php?name=Forums&file=viewtopic&t=200