Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Robert Watson on October 27, 2006, 05:40:48 pm

Title: Multi Sprayer Problem
Post by: Robert Watson on October 27, 2006, 05:40:48 pm

Hi Guys,
I`v got a problem with this sprayer, only had it a short while. http://www.worldofclean.co.uk/index.php?productID=291 

When I bought it I was surprised it didnt come with a mains charger.
You can only charge it from fAg lighter in the van  :-\

Well it ain't happening. Not sure if its getting enough charge from the lighter or it`s
knacked. Starting to think money would have been better spent on a good pump up.

Any help appreciated as always. 

Cheers
Rab

Title: Re: Multi Sprayer Problem
Post by: lee_gundry on October 27, 2006, 06:24:12 pm

have you been intouch with nick.


Lee G

Title: Re: Multi Sprayer Problem
Post by: *paul_moss on October 27, 2006, 06:28:12 pm

Hi I had same prob with mine after about 6 months ,sent it back and Nick fixed it.
Dont use it for spraying Solugard as it blocks and knackers the pump.

Title: Re: Multi Sprayer Problem
Post by: craigp on October 27, 2006, 06:39:30 pm

Paul,

is that the case with all protection?, or is sologuard solvent, so water based ok?

i was thinking of getting one of them too Rab, i thought i'd get the 240v corded one though.

maybe just swap it for the corded one Rab? im sure solutions do that for you.

Title: Re: Multi Sprayer Problem
Post by: *paul_moss on October 27, 2006, 06:56:39 pm

No Just Solugard as I found it to crystalise and block all holes.I use it now in a 500ml plastic hand sprayer with a fine mist head.The sprayer blocks up after a couple of uses so you then have to use a new one.

Title: Re: Multi Sprayer Problem
Post by: Robert Watson on October 27, 2006, 08:56:20 pm

Yeah Lee, been in touch. will try charging from another vehicle over the weekend.

Hi Craig, the reason I bought the battery one, is it`s something less to plug in.
In a small flat it`s too easy to get tangled up, what with the vacuum, agitator and machine.
Hand pump failed today, so looks like I`m pre spraying from the wand tomorrow.

Rab

Title: Re: Multi Sprayer Problem
Post by: craigp on October 27, 2006, 09:03:10 pm

Vacuum? whats that ;D

for protection i use a gloria sprayer and a fluorochemical, a little tip is when finished spraying is to put a piece of plastic bag over the nozzle with a elastic band and your have no blocked jets! you can store the protection in the sprayer then.

ps. i know thats a different problem to what you refer to Paul.

pps. have a look here; these are brillent pump up's i got the 7ltr off ebay £30 last ages! top quility.

http://www.marolex.pl/NO_FLASH_EN/3_compression_pressurized_sprayers_p7.htm