Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Jeremy on October 14, 2006, 10:45:07 am

Title: Olefin/Polyprop Cleaning
Post by: Jeremy on October 14, 2006, 10:45:07 am
Quoted for a Job for a chain of book stores the other day. They are not big and decided to quote high, very high as I wasn't that keen.

Some how they decided that my presentation was good and price was not an issue and gave me an order number for a trial.

The carpet in the store is Olefin. Currently I use the Prochem Duo for Olefin carpets together with my TM set at about 500psi and about 80deg.

At present I don't aggitate the Pre-spray, but still get good results. The snag with this trial store is that the centre management will not allow me to use my TM (They say its too disruptive for the centre).

This means that I have to resort to my Portables SEMCA K353. The snag with this is that they don't heat the water and only push out 60psi.

In order to impress, I will need to agitate the prespray, but I've never resorted to this before.

I was thinking of using a rotary floor tool with a shampoo brush, but is this going to be stiff enough.

What other methods could I use.

Regards
Jeremy
Title: Re: Olefin/Polyprop Cleaning
Post by: Scott Young on October 14, 2006, 12:16:50 pm
Hi Jeremy,

I can c yr problem. Why not invest in a speedstar from Cleansmart. knocks out 450psi twin vac heavy lift, that'll knock em dead. £1,600 I think or something like that.

Invest now. Speculate to accumulate!

Scott
Title: Re: Olefin/Polyprop Cleaning
Post by: John Kelly on October 14, 2006, 01:26:54 pm
Why not just bonnet clean it using a rotary shampoo.
Title: Re: Olefin/Polyprop Cleaning
Post by: Mike Halliday on October 14, 2006, 01:31:59 pm
Scott, Jeremy lives in Cape town SA, will Matt send you that far ;)

I'd go back to the store managers and say the centre won't let you use a T/M but without using a T/M you can't achieve a superior result.

they might have more weight in getting you permission to use your T/M

if not bonnet it

Mike
Title: Re: Olefin/Polyprop Cleaning
Post by: carpetclean on October 14, 2006, 01:52:35 pm
i agree with mike about saying the best results are from a t/m its then their chioce i think they will lean towards being more accomodating especially as if you say you will do the job in  a third of the time just to make a point to them
Title: Re: Olefin/Polyprop Cleaning
Post by: Art of Clean on October 14, 2006, 06:59:58 pm
Hi Jeremy

This is a bit off the topic

How is carpet cleaning in SA?

I am South African and working in UK. Was wondering how it would go would I want to sell here and move back in a few years?

Cheers
Pierre
www.cambridgecleaning.co.uk
Title: Re: Olefin/Polyprop Cleaning
Post by: Jeremy on October 15, 2006, 03:15:10 am
Pierre.

Send me your e-Mail address and we can chat.

Title: Re: Olefin/Polyprop Cleaning
Post by: Jeremy on October 15, 2006, 03:18:32 am
The SEMCA K353 has excellent lift with 2 x 3 stage vacs but little pressure, so the question is how best to agitate.

Will a shampoo brush on a rotary machine do the trick or will I need to get a stiffer brush.

Regards
Jeremy
Title: Re: Olefin/Polyprop Cleaning
Post by: Art of Clean on October 17, 2006, 07:10:34 pm
Hi Jeremy

Can't find your email address.

Please get in touch at info@cambridgecleaning.co.uk
Would be great to have a chat

Cheers

Pierre
Title: Re: Olefin/Polyprop Cleaning
Post by: AquaMagic on October 17, 2006, 10:28:43 pm
Why not invest in a agitation machine, although designed for dry compound we use the Sebo Dou, they are about £180 new and you can put stiffer red brushes on them should you need to also you then you have a VLM option should you need it in the future.  Or you could go for something with a bit more whoomph such as a Host, Agimac or numerous others available nowadays.

Hope this helps.

If you do go for the rotary option i hear that M Power excels with this type or cleaning although ive only used it with HWE personaly.

Dene
Title: Re: Olefin/Polyprop Cleaning
Post by: Jeremy on October 24, 2006, 05:44:51 am
Did the job yesturday. To my horror there wasn't even any hot water. So not only did I not have my TM, but had a 60PSI porty with cold water.

We used the Prochem DUO, but ran out of the pre-spray almost before we started and so we switched to our normal pre-spray but mixed to double strength.

We didn't use any mechanical aggitation.

Absolute shock and disbelief - The carpets came up almost new. The job took 1 hour to clean 120 square meters with 3 portable machines and 4 staff.

Charged them a premium price

Will be very happy to do all the other stores now. What a relief

Regards
Jeremy
Title: Re: Olefin/Polyprop Cleaning
Post by: rich hand on October 24, 2006, 09:43:56 pm
You have got a TM (although using semcas on this job) and atleast 3 staff, surely you have got confiedence and know how!
Title: Re: Olefin/Polyprop Cleaning
Post by: Damian on October 24, 2006, 11:08:31 pm
And no means whatsoever of heating any water? If you gotta good result then good for you ;D
Title: Re: Olefin/Polyprop Cleaning
Post by: Jeremy on October 25, 2006, 05:32:26 am
Rich.

COnfidence is not an issue. Confidence comes with experience. We did not have any experience of cleaning a polyprop carpet with a 60psi semca and cold water.

The reason for the post originally was to get your experiences. If you look back at the reply's, not many people gave any useable feedback, so I'm not sure what you are now telling me.  Does confidence clean carpets or does knowledge clean carpets. Or are these interlinked.


Jeremy