Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: oceancolour on September 20, 2006, 08:29:51 pm

Title: w f p switch
Post by: oceancolour on September 20, 2006, 08:29:51 pm

hi all
3 days in to using my trolly system getting on ok
but for one annoying thing is that i have to dash to the trolly to turn on and of
so wondered if a switch could be the answer at the base of my pole this would save time and water. any help would be great kind regards jeff

Title: Re: w f p switch
Post by: pylofm on September 20, 2006, 09:02:17 pm

I put one of these on the end of the pole...does the trick...

#Cheers Dave.

Title: Re: w f p switch
Post by: Jeff Brimble on September 20, 2006, 09:16:31 pm

Auto brush link.
http://www.window-tools.com/auto.htm

Title: Re: w f p switch
Post by: david68 on September 20, 2006, 11:06:08 pm

Hi
Good post
I was using my trolley to day and also had same problem.
Can we buy some sort of remote to fit to the trolleys?

Dave

Title: Re: w f p switch
Post by: D.Salkeld_Ltd on September 21, 2006, 06:55:59 am

Guys,

You should have a Varistream pump controler and pressure switch on the pump as standard.  Then just fit a ball valve to the bottom of your poles.  Turn of the water and the pump stops.

Title: Re: w f p switch
Post by: Alex Gardiner on September 21, 2006, 08:02:32 am

All pole systems should be supplied with a pole control valve (or similar) as standard.

We consider them to be essential, and would never send a system out without one.

Alex

Title: Re: w f p switch
Post by: groundhog on September 21, 2006, 01:39:58 pm

You could try bending the pipe over to stop the flow, it works quite well :)

Title: Re: w f p switch
Post by: AuRavelling79 on September 21, 2006, 05:04:43 pm

I use an autobrush.