Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: MNWC on September 14, 2006, 07:41:00 pm

Title: Di Cannister
Post by: MNWC on September 14, 2006, 07:41:00 pm

Hi All

Why does my di cannister only half fill up with water ??

Im still still getting the same amount of product water.

When i change resin it fills up slowly and product water trickles out as it should. Im using ro-man 100 gals system.

Does any one else have this problem/solution?

Marcus
M N Window Cleaners.

Title: Re: Di Cannister
Post by: freshwater on September 14, 2006, 09:08:38 pm

Its probably an air lock due to the low flow rate of the water. All that will happen is you are not using your resin to its full potential.

steve@freshwatersystems.co.uk

Title: Re: Di Cannister
Post by: MNWC on September 14, 2006, 09:10:52 pm

you could be right would a pump solve the prob ??

I only have about 35 psi.

Marcus.

Title: Re: Di Cannister
Post by: pjulk on September 14, 2006, 09:56:48 pm

I take it you are using a 10" D/I cannister.

If so mine does exactly the same and i have a pump.

I don't worry about it my water is always fine.

Paul