Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: darren_metcalfe on September 12, 2006, 04:49:49 pm

Title: Dry Fusion
Post by: darren_metcalfe on September 12, 2006, 04:49:49 pm

Hi Chaps,

Could someone let me know approximately how many sq/m one would be able to expect to achieve per hour using the above or any other  kind of low moisture cleaning system, bonnet etc.

Regards

Darren

Title: Re: Dry Fusion
Post by: carpetclean on September 12, 2006, 04:59:59 pm

have a word with nick holman

Title: Re: Dry Fusion
Post by: paul_smith on September 12, 2006, 08:27:44 pm

Darren,

with texatherm i do about 100m square/hour.

think the new encap machines can do more but you have to do a follow up vac next day or when dry.

Paul

Title: Re: Dry Fusion
Post by: darren_metcalfe on September 12, 2006, 08:48:12 pm

Cheers Paul/carpetclean

Title: Re: Dry Fusion
Post by: bob on September 12, 2006, 09:14:09 pm

Hi

I do about 1000 to 1500 sq.mts per day. but as always it depends on the kind of carpet how bad it is and how much there is to move, also remember that one pad will only clean up to 22 sq.mts so to clean 1000sq,mts you will require around 46 pads. we have done over 2000 sq mts in an 8 hour day,

Also we work in a team of two

hope that helps you, you can always chat with me on 07918147048

Bob Jennings

Title: Re: Dry Fusion
Post by: mark_roberts on September 12, 2006, 10:13:10 pm

I have Texatherm and if your using it the way your supposed to very rarely will you do 100sqm per hour esp not if your pre-vacuuming beforehand.  On open areas 100sqmperhour may be possible but for me not the norm.

Mark

Title: Re: Dry Fusion
Post by: HolmansUKLTD on September 14, 2006, 07:54:49 am

we have been doing 800m2 to 1000m2 per day this week as a 2 man  team.

fastest bonnett system i have used :o

Nick

Title: Re: Dry Fusion
Post by: carpetclean on September 14, 2006, 09:42:37 am

i was lucky to work with nick with his charley pad system last year so i know he is not giving any bull on speed

Title: Re: Dry Fusion
Post by: HolmansUKLTD on September 18, 2006, 08:58:01 pm

yep thats right Pete but the DF is even faster and better than charley pads, allthough i occaisonaly use no9 :o with my DF system which may break the machine im told :P

Mind you the money you can earn with DF is stupid :o

Nick

Title: Re: Dry Fusion
Post by: stevegunn on September 18, 2006, 09:07:47 pm

Nick just send my commision by courier  ;)

Title: Re: Dry Fusion
Post by: HolmansUKLTD on September 18, 2006, 09:10:32 pm

it might have to be in a lorry at this rate the DF work has gone through the roof!! tenders comming through my letterbox once a week :o

And i dont even advertise it ???

Nick

Title: Re: Dry Fusion
Post by: paul_smith on September 18, 2006, 10:11:23 pm

Is DF faster than texatherm?
They both seem similar in the way you do the job,
Paul

Title: Re: Dry Fusion
Post by: HolmansUKLTD on September 19, 2006, 08:08:57 am

Yes its faster :o

Nick

Title: Re: Dry Fusion
Post by: darren_metcalfe on September 19, 2006, 09:25:22 am

Nick,

As mentioned above the pads will only do about 22m2 what are the cost of these?

Also I would be very interested in ahving a chat with you about your commercial work if at all possible.

REgards

Darren