Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: dougster on August 29, 2006, 10:37:13 pm

Title: ro problems
Post by: dougster on August 29, 2006, 10:37:13 pm

Help, went outside this morning to turn on the water tap to the water purificaton system, just as normall. as i have run out of pure water.
And the barrel started to fill really fast, and i knew that something was wrong.so i checked i had the correct pipe, and i had. but when i checked with my tdi tester , it came back as the same tdi reading as the tap water in the house, any help please at all thanks

Title: Re: purification problems
Post by: freshwater on August 29, 2006, 11:06:53 pm

doug,

do you have a DI system or an RO system.

steve@freshwatersystems.co.uk

Title: Re: purification problems
Post by: dougster on September 04, 2006, 10:47:57 pm

i have an ro system cheers

Title: Re: ro problems
Post by: freshwater on September 05, 2006, 08:17:28 pm

Doug,

Possible problems:- Drain restrictor bust, membrane bust, flush valve open, flush valve bust.

steve@freshwatersystems.co.uk

Title: Re: ro problems
Post by: dougster on September 07, 2006, 10:24:21 pm

how and where do i go about trying to figure it out thanks dougie

Title: Re: ro problems
Post by: freshwater on September 10, 2006, 10:21:29 am

Sorry for the delay in responding, been away for a few days.

Process of elimination.

Least cost first:

Is your flush valve open or closed?

Pull the tube out of the flush valve and see if any water is getting through? If it does replace it.

Remove the drain restrictor and blow through it, it should be difficult, very little air should get though, if it does replace it.

If all the above are OK. Replace the membrane.


steve@freshwatersystems.co.uk

Title: Re: ro problems
Post by: dougster on September 10, 2006, 10:34:09 pm

cheers steve will have a go tom, thanks