Clean It Up

Market Place => Used Equipment For Sale/Wanted => Topic started by: robbie14000 on July 30, 2006, 06:16:11 pm

Title: Cleaning around poolsides
Post by: robbie14000 on July 30, 2006, 06:16:11 pm

Hi all,
I am after some advice.
I have been asked to undertake some cleaning around a poolside.(hard surface)
Can anyone give me any info on what to use bearing in mind the pool is a flat deck pool and the chemicals will run into the channels and through their dosing system.
Is there a water- based substance that can be used that would be strong enough.
Thanks in advance
Robbie - Clearshine - harrogate

Title: Re: Cleaning around poolsides
Post by: Dave Roelants on July 30, 2006, 06:31:15 pm

Hi Robbie,
I do quite a lot of this work using a Truckmount and a Hard surface tool. As I'm rinsing and extracting at the same time chemicals going into the pool are not a problem. I can't think of any way to do it otherwise due to the problem you've identified.
Best Regards
Dave

Title: Re: Cleaning around poolsides
Post by: robbie14000 on July 30, 2006, 07:46:14 pm

Thanks for your swift reply dave.
I will hire an extractor which will limit any chemicals going into the pool.
What type of chemicals do you use?
Many thanks

Robbie - Clearshine -Harrogate

Title: Re: Cleaning around poolsides
Post by: Dave Roelants on July 31, 2006, 09:45:29 pm

Hi Robbie,
I'd need more info here as to type of surround and degree of soiling although personally in this situation I'd always try and use a microsplitter for safety
Best Regards
Dave