Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: the king on July 06, 2024, 09:06:47 pm
-
has anyone had any issues with spinning sections ,the tension bolt keeps undoing and then it spins, im having to adjust the things 6 or 7 times a day ! the top section has now got quite a bit of were already due to it spinning, not had pole long, ive had loads of extremes but may try phamton next or evo8 high mod also end cap keeps falling off had to glue it .
-
At most I have to adjust one or two clamps just once a day.
On a previous pole I replaced the Nylock nuts with new ones when this started happen frequently and that worked for me.
-
I use thread lock in mine so never had a problem. When I do need to tighten one then I may have to get the hairdryer out again but it was the best time saving thing I have did on them.
-
Have you replaced the shims?
https://gardinerpolesystems.co.uk/gardiner-smart-clamp-delrinr-shims.html
Makes a big difference. The shims take the wear before the pole does Aslong as they are replaced when needed.
-
Have you replaced the shims?
https://gardinerpolesystems.co.uk/gardiner-smart-clamp-delrinr-shims.html
Makes a big difference. The shims take the wear before the pole does Aslong as they are replaced when needed.
Nice catch.
-
I replace the shims and springs occasionally when the clamps begin to feel tightened to near the max and pole starts spinning.
-
pole is fairly new top section is badly worn due to the clamp nut working loose
-
pole is fairly new top section is badly worn due to the clamp nut working loose
Use a bit of threadlock on the bolt.