Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Steve Weatherley on April 11, 2022, 08:55:29 pm
-
Does anyone use these? I have been using version 1 and been happy with it but now see they have updated it....
-
Does anyone use these? I have been using version 1 and been happy with it but now see they have updated it....
We use the original and love it dont like the look of the new ones and won’t be using them
-
Thanks. I've been using the version 1 for 2 years and also love it.
I've just ordered the new version to try out. As I have a two man setup I will have one on each version. So will be able to make a comparison
-
I think the new version will be prone to disconcerting as the fitting enters the pole and also it will be very clinked hitting the end of the pole
-
I used mine all day today and didn't seem to have any disconnecting issues as it went up the pole. I have a uni valve fitted also and there were no issues with switching on or off. The only slight issue I had was when connecting it to my old female connector on the main hose reel sometimes it failed to connect but I think this is probably because it's still the old female connector
-
I used mine all day today and didn't seem to have any disconnecting issues as it went up the pole. I have a uni valve fitted also and there were no issues with switching on or off. The only slight issue I had was when connecting it to my old female connector on the main hose reel sometimes it failed to connect but I think this is probably because it's still the old female connector
Ime guessing it takes two hands to attach it rather than one when the fitting is just inside the pole ???
-
Think you may have misunderstood me.
My male connector is on the end of hosetail that sticks out of the end of the pole by 6 inches instead of version one of tubeless where it was inside the pole. The female connector is on the end of my main hosereel and sits inside the black cover (I forget it's name).
I did have to lean the pole up against a wall or rest it on something like a wheelie bin in order to be able to connect the pole as it did indeed take 2 hands. Personally I didn't feel inconvenienced by this though.
Hope this info is useful
-
The new version is a load of poope and I don't know why they've done it.
-
Ortsa I'm curious to hear your reasons. I'm only one day into using it so have little evidence to agree or disagree.
-
Think you may have misunderstood me.
My male connector is on the end of hosetail that sticks out of the end of the pole by 6 inches instead of version one of tubeless where it was inside the pole. The female connector is on the end of my main hosereel and sits inside the black cover (I forget it's name).
I did have to lean the pole up against a wall or rest it on something like a wheelie bin in order to be able to connect the pole as it did indeed take 2 hands. Personally I didn't feel inconvenienced by this though.
Hope this info is useful
No I understand fully what you are saying I tried the hose tails sticking out of the end of the pole myself years ago didn’t like it at all , but with the fitting in section one of the pole and pushing the ejected sleeve up into the pole works a treat , I have converted all 28 of our poles to this it is brilliant very quick and easy
-
The new version is a load of poope and I don't know why they've done it.
Totally agree I made a set up like that 15 years ago waist of time
-
Ortsa I'm curious to hear your reasons. I'm only one day into using it so have little evidence to agree or disagree.
To quote one of my posts elsewhere
'You now can't easily and smoothly connect and disconnect with your pole in one hand and your hose in the other, now you've got 6 inches of hose dangling awkwardly from the end of your pole. You've got to put the brush head on the ground to grab hold of this dangling mess and same to disconnect. Also the whole lot is more likely to get caught on the base cap as it goes up into the pole.
At least Gardiner have the decency to continue legacy products for those who need it (when they introduced the new gooseneck for example)
I'll probably end up having to 3d print the bits myself
-
Ortsa I'm curious to hear your reasons. I'm only one day into using it so have little evidence to agree or disagree.
To quote one of my posts elsewhere
'You now can't easily and smoothly connect and disconnect with your pole in one hand and your hose in the other, now you've got 6 inches of hose dangling awkwardly from the end of your pole. You've got to put the brush head on the ground to grab hold of this dangling mess and same to disconnect. Also the whole lot is more likely to get caught on the base cap as it goes up into the pole.
At least Gardiner have the decency to continue legacy products for those who need it (when they introduced the new gooseneck for example)
I'll probably end up having to 3d print the bits myself
The only parts that you need to ensure you can use the original exceed hoseless design is the "pole bung" that sits at the base of the top section of the pole. If you can find a way to get these theres no reason why you can't continue to use original design.
That is what i plan to do anyway.
-
Ortsa I'm curious to hear your reasons. I'm only one day into using it so have little evidence to agree or disagree.
To quote one of my posts elsewhere
'You now can't easily and smoothly connect and disconnect with your pole in one hand and your hose in the other, now you've got 6 inches of hose dangling awkwardly from the end of your pole. You've got to put the brush head on the ground to grab hold of this dangling mess and same to disconnect. Also the whole lot is more likely to get caught on the base cap as it goes up into the pole.
At least Gardiner have the decency to continue legacy products for those who need it (when they introduced the new gooseneck for example)
I'll probably end up having to 3d print the bits myself
The only parts that you need to ensure you can use the original exceed hoseless design is the "pole bung" that sits at the base of the top section of the pole. If you can find a way to get these theres no reason why you can't continue to use original design.
That is what i plan to do anyway.
Making the bung is the easy part , we use theses , the important bit is the ejected sleeve (http://www.cleanitup.co.uk/smf/1649798999_91C2D787-8B4D-4F82-88AC-D8411278CD5D.jpeg)(http://www.cleanitup.co.uk/smf/1649798998_53A3AC91-7907-4D7D-AB0A-6D530ECA78C7.jpeg)
-
Ortsa I'm curious to hear your reasons. I'm only one day into using it so have little evidence to agree or disagree.
To quote one of my posts elsewhere
'You now can't easily and smoothly connect and disconnect with your pole in one hand and your hose in the other, now you've got 6 inches of hose dangling awkwardly from the end of your pole. You've got to put the brush head on the ground to grab hold of this dangling mess and same to disconnect. Also the whole lot is more likely to get caught on the base cap as it goes up into the pole.
At least Gardiner have the decency to continue legacy products for those who need it (when they introduced the new gooseneck for example)
I'll probably end up having to 3d print the bits myself
The only parts that you need to ensure you can use the original exceed hoseless design is the "pole bung" that sits at the base of the top section of the pole. If you can find a way to get these theres no reason why you can't continue to use original design.
That is what i plan to do anyway.
Making the bung is the easy part , we use theses , the important bit is the ejected sleeve (http://www.cleanitup.co.uk/smf/1649798999_91C2D787-8B4D-4F82-88AC-D8411278CD5D.jpeg)(http://www.cleanitup.co.uk/smf/1649798998_53A3AC91-7907-4D7D-AB0A-6D530ECA78C7.jpeg)
what is that? Looks good
Also the ejector sleeve is still available in their version 2 (although its a bit shorter)
-
Ortsa I'm curious to hear your reasons. I'm only one day into using it so have little evidence to agree or disagree.
To quote one of my posts elsewhere
'You now can't easily and smoothly connect and disconnect with your pole in one hand and your hose in the other, now you've got 6 inches of hose dangling awkwardly from the end of your pole. You've got to put the brush head on the ground to grab hold of this dangling mess and same to disconnect. Also the whole lot is more likely to get caught on the base cap as it goes up into the pole.
At least Gardiner have the decency to continue legacy products for those who need it (when they introduced the new gooseneck for example)
I'll probably end up having to 3d print the bits myself
The only parts that you need to ensure you can use the original exceed hoseless design is the "pole bung" that sits at the base of the top section of the pole. If you can find a way to get these theres no reason why you can't continue to use original design.
That is what i plan to do anyway.
Making the bung is the easy part , we use theses , the important bit is the ejected sleeve (http://www.cleanitup.co.uk/smf/1649798999_91C2D787-8B4D-4F82-88AC-D8411278CD5D.jpeg)(http://www.cleanitup.co.uk/smf/1649798998_53A3AC91-7907-4D7D-AB0A-6D530ECA78C7.jpeg)
what is that? Looks good
Also the ejector sleeve is still available in their version 2 (although its a bit shorter)
They are water pipe anti crush inserts . Most plumbers merchants or farm shops sell them