Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H MAN on November 06, 2020, 03:29:24 am

Title: Closer look Herme Swivel on Water Fed Pole
Post by: H MAN on November 06, 2020, 03:29:24 am
THIS WILL SHOW YOU HOW THE SWIVEL MOVEMENT WORKS AND. CONNECTS TO YOUR WATER FED POLE. EXPLAINING WHY IT IS BETTER THEN OTHER SWIVELS.
https://youtu.be/znq00smAmJc
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: Simon Trapani on November 06, 2020, 02:00:01 pm
Wow!

Looks amazing!

So professional.

Where can I get one? ::)roll
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: Wind o kleen on November 06, 2020, 04:02:39 pm
🤷‍♂️ It swivels
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: Bungle on November 06, 2020, 05:01:36 pm
Not clicking, not clicking, not clicking..........
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: ֍Winp®oClean֍ on November 06, 2020, 05:14:56 pm
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: windowswashed on November 06, 2020, 06:17:32 pm
Reach - it have the best swivel fitted on the 'Radial' brush
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: tlwcs on November 06, 2020, 07:26:16 pm
Not clicking, not clicking, not clicking..........

I did it for you.. nothing to see
here.
You owe me. 😁
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: H MAN on November 06, 2020, 07:47:32 pm
Reach - it have the best swivel fitted on the 'Radial' brush
Yes is good however the swivel is restricted to a side to side motion not curvature motion.(http://www.cleanitup.co.uk/smf/1604691999_RADIAL BRUSH.png)
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: Bungle on November 06, 2020, 07:55:55 pm
Shouldn’t you be in bed Herman?
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: Dave Willis on November 06, 2020, 08:04:14 pm
Why didn’t you use the one from the squeegie handle you showed the other week? That one looked more professional.
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: H MAN on November 06, 2020, 08:45:06 pm
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: H MAN on November 06, 2020, 09:12:51 pm
Why didn’t you use the one from the squeegie handle you showed the other week? That one looked more professional.
Have actually tried that swivel movement  smaller one though.
Found was a weak point that does not allow you to put heavy pressure on it without it breaking.
The one have works the same and is much stronger.
Know it may not look  professional. , but this is a prototype.

Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: Bungle on November 06, 2020, 09:31:47 pm
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]

Feck me, I had to keep taking my glasses on and off to read that 😂
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: H MAN on November 06, 2020, 09:39:01 pm
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]

Feck me, I had to keep taking my glasses on and off to read that 😂
Yes that might be that you not a seasoned swiveller' ??? ::)roll ;D
Title: Re: Closer look Herme Swivel on Water Fed Pole
Post by: Dry Clean on November 06, 2020, 09:44:04 pm
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]
(http://www.cleanitup.co.uk/smf/1604699039_OIPbbbbb.jpg)