Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: shammy davis jnr on November 02, 2020, 03:41:14 pm
-
Hi folks needing a bit off help with this one control unit on one of my hoses won't turn off??? Tryed pulling fuse which worked put fuse back in and it comes on straight to calabrate which I did then t does not switch off? Works OK but wasn't wanting to leave all night incase the pump gets worn out?? Totally stumped on this on so pulled fuse and left till tomorrow, to scratch my head a bit 😂 Ps... Right hand side working as should just seems to be left one,,, so any advice welcomed
Cheers guys
-
Is this a spring co troller ?
email Ian Shepherd - explain what's happening and he will give you an idea of what's wrong - spring do repairs - cost is dependant on problem
ive had 3 repaired over the years and a really old labeled as pure freedom which Ian said was too old to repair so binned it
Darran
-
Thanks smudge do you have a link
-
Hi folks needing a bit off help with this one control unit on one of my hoses won't turn off??? Tryed pulling fuse which worked put fuse back in and it comes on straight to calabrate which I did then t does not switch off? Works OK but wasn't wanting to leave all night incase the pump gets worn out?? Totally stumped on this on so pulled fuse and left till tomorrow, to scratch my head a bit 😂 Ps... Right hand side working as should just seems to be left one,,, so any advice welcomed
Cheers guys
Hi My email is is ian.sheppard@springltd.co. Have you had any luck during the day with the controller. One suggestion would be to remove the faceplate and check the buttons are not sticking.
Also how old is the controller please
Cheers
Ian
-
Thank you Ian the other ones started doing same I will send a vid of you could help trouble shoot buddy,,, but no still doing it? If buttons stick how do you over come this
-
Thank you Ian the other ones started doing same I will send a vid of you could help trouble shoot buddy,,, but no still doing it? If buttons stick how do you over come this
I will keep an eye out for the video as it will be useful to see what is happening.
With the buttons I was just checking they move freely with the face plate off. There is a white spacer that sits on top of the button so its between the button stub and label, sometimes these spacers move slightly and holds the button down.
-
One controller maybe, 2 controllers with the same symptom, hmmm.
Have you accidentally reversed polarity when replacing the battery?
-
One controller maybe, 2 controllers with the same symptom, hmmm.
Have you accidentally reversed polarity when replacing the battery?
Hi Spruce.
In fairness to Andy in this instance the controllers do have a fault and they are going to be coming back to Spring for us to check out.
Cheers