Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: pt on July 09, 2006, 05:47:07 pm

Title: Litres per minute@ brush?
Post by: pt on July 09, 2006, 05:47:07 pm

I am setting up my wfp system. At the moment i am using 3mm pencil jets and am getting 1lt of water through the jets per minute.Is this enough or should it be more? Any helpis most welcome.

Many Thanks,

Paul.

Title: Re: Litres per minute@ brush?
Post by: Jeff Brimble on July 09, 2006, 06:57:08 pm

1 litre/min is the average total output. 3 litre per min is probably too much.

Title: Re: Litres per minute@ brush?
Post by: Clear Vision on July 09, 2006, 08:28:38 pm

Jeff,

Your a minimalist ;D ;D ;D

If you are a slow worker 1 litre is enough.

But if your a quick worker and have a autobrush crank it up! ;D ;D

You can never over rinse.


P.S. Jeff, you worked that police station out bang on! :) It took me exactly the ammount of time you thought. Cheers ;)

Title: Re: Litres per minute@ brush?
Post by: Chris Cottrell on July 09, 2006, 09:02:29 pm

I'm using 1.15lpm seems enough for me

Ps I wouldn't mind seeing the Tucker pole in action Paul
maybe catch up with you sometime

Chris

Title: Re: Litres per minute@ brush?
Post by: pt on July 09, 2006, 09:15:28 pm

Thanks for the advice, I will use at 1lt a min and see how I get on.Chris I will give you a ring in a few weeks.

Thanks,

Paul.

Title: Re: Litres per minute@ brush?
Post by: Jeff Brimble on July 09, 2006, 10:27:09 pm

Litres per min= phooey
You need enough for the job whatever it is. Not too much, not too little.
It was a guestimate Clear Vision.  ::)