Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jonboywalton75 on April 07, 2020, 04:16:07 pm
-
I have an airlock problem and was looking to change my suction pipework to john guest fittings, i have a tank outlet as pictured and a Shurflo strainer also as pictured and wondered what fittings and pipe i needed to connect up to my Shurflo pump.
Help appreciated
(http://www.cleanitup.co.uk/smf/1586272318_Screenshot_20200407-160700_Chrome.jpg)(http://www.cleanitup.co.uk/smf/1586272308_rps20200407_161113.jpg)
-
I use John guest 15 mm pipes and fittings central heating combi boller fitting fits to the Sureflow pump inlet/outlet
-
I’m confused to what it is you want.
Do you want to connect what you have posted above to your shurflo (that strainer will connect direct to the pump), or are you asking ‘what john guest fittings do you need’?
-
I’m confused to what it is you want.
Do you want to connect what you have posted above to your shurflo (that strainer will connect direct to the pump), or are you asking ‘what john guest fittings do you need’?
Of course that strainer will fit straight to the pump, silly me
Yeah just wondered what John guest fittings i need to connect the elbow to the pipe and then the pipe to the strainer, thanks
-
Look at my post above have set several vans up with jg fittings
-
Look at my post above have set several vans up with jg fittings
I'll use your recommendation David.
Just wondered what fitting/reducer to use to fit the piping to the strainer
-
I use John guest 15 mm pipes and fittings central heating combi boller fitting fits to the Sureflow pump inlet/outlet
Oh yeah just re read this ;D
-
(http://www.cleanitup.co.uk/smf/1586283387_Screenshot_20200407-191547_Chrome.jpg)
Could i use one of these to adapt the strainer to the John guest tubing?
I'm a bit thick with this, sorry ;D
-
15mm pipe to pump/ strainer.........
https://www.screwfix.com/p/jg-speedfit-plastic-push-fit-straight-tap-connectors-15mm-x-2-pack/29175
To go from the tank to 15mm pipe you gonna need a brass reducer. I'm not sure what that thread size is that comes out of your tank, someone else might know ?
-
Cheers Mike
-
Use this for your tank:
https://purefreedom.co.uk/large-tank-outlet-fittings-kit.html
You can the double jubilee clip the hose onto the barb. (There are different sizes, just get the relevant one to the hose you want to use)
Those plastic ones you’ve listed above have the potential of breaking a little if you tighten the jubilees too tightly.
-
Use this for your tank:
https://purefreedom.co.uk/large-tank-outlet-fittings-kit.html
You can the double jubilee clip the hose onto the barb. (There are different sizes, just get the relevant one to the hose you want to use)
Those plastic ones you’ve listed above have the potential of breaking a little if you tighten the jubilees too tightly.
Cheers for the reply Don
Remember why i joined this forum 11 years ago, ;D ;D