Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Temple cleaning services on July 01, 2019, 08:37:37 pm
-
Hi, I noticed my tds going up to about 005 so I changed my pre filters, softener and resin like I always do. Straight after my TDS normally is 000 and sorted for quite a while but it shot upto about 010. So I assumed my ro membrane was ready for a swap (2 years). I’ve done that but instead of reading 000 it’s back up above 010. My question is have I instantly knackered my softener and resin because I didn’t change to ro first? Any help would be much appreciated!!
-
010 after RO or 010 after resin? RO won't give you 000. Your post is slightly confusing.
-
Bungle any chance you would mind giving me a quick call on 07921506667? If you know a bit about this stuff it would put my mind at rest!! Sorry to be cheeky!
-
Hi, I noticed my tds going up to about 005 so I changed my pre filters, softener and resin like I always do. Straight after my TDS normally is 000 and sorted for quite a while but it shot upto about 010. So I assumed my ro membrane was ready for a swap (2 years). I’ve done that but instead of reading 000 it’s back up above 010. My question is have I instantly knackered my softener and resin because I didn’t change to ro first? Any help would be much appreciated!!
If your resin is the same stuff (unchanged) from before you swapped the membrane then yes you have knackered the resin.
-
The first thing you need to check is the TDS coming from the membrane, run it for a while first, this will tell you if the new membrane is working ok, chances are you have got a bad batch of resin and have changed your first membrane when it was still ok.
-
Have you made sure the hoses are going into the di the right way.
-
Did you sort it?
-
When you swap your pre filters etc, it's wise to leave your system to run for a good while and let all the loose particles run through etc, hence your readings.
Or
Flush it, if you have a flush valve.
It's also worth noting, not to get into a panic and then start making rookie mistakes because of 2nd guessing things. It will be fine! Though, don't fall into this trap of thinking 005 isn't going to clean the windows as good and leave spotting! Trust me, it won't! My water goes in at just short of 300 tds and leaves the RO between 006 n 009 (can't recall which one it is, as I haven't had the need to check for a good while) and I haven't used resin for such a long time now. It fills up my ibc tank and I transfer it to the van and go work.