Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: clarkson on May 22, 2019, 02:39:37 pm
-
Hi all
Just come across a tap on standpipe
It’s a male thread out with no markings
We carry 1 inch bsp and 3/4 as standard but is in between
Thinking it could be 22mm metric
Any other ideas
Cheers
John
-
when you say standpipe are you talking a water authority or a customers outside tap ?
we have found there is a rogue size tap - they all seem very old we tend to put a rubber connector on these ( the ones you hold in place with a jubilee clip )
Darran