Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: steve cardy on June 30, 2006, 07:26:14 am

Title: t/m wand
Post by: steve cardy on June 30, 2006, 07:26:14 am

Can any one tell me does a t/m wand have to use metal solution hose?I only ask as the rest of my hose is 3000 goodyear solution and that is whats on my existing wand.OR does the extra psi and heat at that end of the system need the metal hosing and fittings.

Title: Re: t/m wand
Post by: BRSL on June 30, 2006, 07:35:58 am

No it's fine, mine is also blue goodyear hose and works regulary at over 500 psi and 230 degree's I think the titanium wand has a solid fitting but it's not essential just cost a lot more

James

Title: Re: t/m wand
Post by: Liahona on June 30, 2006, 09:21:30 am

Both work ok its just that the stainless one wont break down as quick. Best, Dave.

Title: Re: t/m wand
Post by: steve cardy on June 30, 2006, 01:00:01 pm

Thank you both very much.
Dave when you say the hose will break down quicker than the metal i dont suppose you know what sort of time frame we are looking at.
 cheers steve.

Title: Re: t/m wand
Post by: PaulKing on June 30, 2006, 07:40:51 pm

a long time. had a blue hose wand for over two years cleaning at hot 500psi never chaged a thing.

used a tubed wand for last three years and same again. except for one 1/8 o-ring

Title: Re: t/m wand
Post by: carpetclean on June 30, 2006, 11:09:40 pm

hi steve i know you love your present wand so keep your well earned cash in your pocket. got all the stuff you asked for by the way i will try to get it to you over the week end i am working in the morning until around noon so anytime after that