Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: advanced on March 09, 2019, 10:38:55 pm

Title: Gardiners angle adapter
Post by: advanced on March 09, 2019, 10:38:55 pm: Gardeners angle adaptors
I wish gardiners would make these with a right handed release instead of left as I find it quicker to adjust from right hand
Title: Re: Gardiners angle adapter
Post by: Smudger on March 09, 2019, 11:35:23 pm: Turn the bolt assy. Around

Darran
Title: Re: Gardiners angle adapter
Post by: P @ F on March 10, 2019, 07:20:23 am: Is this real ?
I have been looking for a left handed clover reel myself 🤣
Title: Re: Gardiners angle adapter
Post by: Slacky on March 10, 2019, 07:30:18 am: https://m.youtube.com/watch?v=BUl6PooveJE
Title: Re: Gardiners angle adapter
Post by: advanced on March 10, 2019, 02:20:24 pm: I can turn the bolt around but then it won’t have the right shape nut hole there that keeps it in place.
Title: Re: Gardiners angle adapter
Post by: advanced on March 10, 2019, 02:22:31 pm: I am also lookin* for a left handed screwdriver 😂😂😂
Title: Re: Gardiners angle adapter
Post by: Alex Gardiner on March 10, 2019, 04:37:43 pm: Quote from: advanced on March 09, 2019, 10:38:55 pm
Gardeners angle adaptors
I wish gardiners would make these with a right handed release instead of left as I find it quicker to adjust from right hand

If you buy one of these 'capped' lever sets (https://gardinerpolesystems.co.uk/all-products/water-fed-poles/goosenecks-pole-fittings/gooseneck-parts/resi-neck-lever-set.html) then you can fit these either way around on the gooseneck.
Title: Re: Gardiners angle adapter
Post by: Simon Trapani on March 10, 2019, 05:17:28 pm: Quote from: advanced on March 09, 2019, 10:38:55 pm
Gardeners angle adaptors
I wish gardiners would make these with a right handed release instead of left as I find it quicker to adjust from right hand
Don't worry advanced, I'm weird too ;D. I prefer them the opposite way round! They used to come that way round. I don't think it's quite as easy now to just take the bolt out and re-insert from the other side as like you said, the bolt won't fit in the nut hole. They've been modified slightly over the years. I also bought some slightly longer bolts & penny washers to slow the wear down as I found they ground together preventing a smooth action and wouldn't clip up properly unless done up like a gorilla.I also have my quick release handle slung underneath as well as I find it catches on top.

(http://www.cleanitup.co.uk/smf/1552238189_IMG_1150.JPG)

(http://www.cleanitup.co.uk/smf/1552238189_IMG_1152.JPG)
Title: Re: Gardiners angle adapter
Post by: advanced on March 10, 2019, 07:26:29 pm: Thanks Alex and Simon for your response will buy what Alex suggested