Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: george renwick on June 17, 2018, 03:11:22 pm

Title: Di vessel can they go wrong
Post by: george renwick on June 17, 2018, 03:11:22 pm

I use two vessel system and the first one is only reading 4  but the second in l one keeps coming out at 1 or 2  .Is there anything inside them that can go wrong and needs to be replaced  ??? ??? ???

Title: Re: Di vessel can they go wrong
Post by: Shrek on June 17, 2018, 03:44:40 pm

Could be your tds meter? Is it a cheap one off eBay?

Title: Re: Di vessel can they go wrong
Post by: JandS on June 17, 2018, 08:00:07 pm

Not necessarily off e bay I've had one from a reputable supplier that reads wrong........

Title: Re: Di vessel can they go wrong
Post by: JandS on June 17, 2018, 08:01:57 pm

Altogether I have 3...all the same make and not one of them reads correctly with the calibration fluid....probably the fluid although that was from supposed reputable supplier.

Title: Re: Di vessel can they go wrong
Post by: Slacky on June 17, 2018, 08:59:03 pm

The riser tube can either be loose or leak, maybe from a crack in it. This can mean water bypassing the resin leading to contaminated water.

Title: Re: Di vessel can they go wrong
Post by: dazmond on June 17, 2018, 09:00:23 pm

Quote from: madferrit on June 17, 2018, 03:11:22 pm

I use two vessel system and the first one is only reading 4  but the second in l one keeps coming out at 1 or 2  .Is there anything inside them that can go wrong and needs to be replaced  ??? ??? ???

Its obvious.......your second vessels resin is spent....