Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: borg on June 22, 2006, 12:04:16 am
-
hi how long should it take 2 fill a water butt 210 lt it took me 6 hours 2 fill a 25 lt container some help please i have 5 stage ro sys.
-
Hmmm,
What is your water pressure?
Is your system set to backwash?
In 6 hours you should have been able to fill your 210 litre tank no problem.
My 1st guess is your water pressure!
Let s know.
Trev
-
It depends what 5 stage RO you have,
A 100gpd will produce about 16-18 litres per hour on decent pressure.
A 200gpd will produce about 27-30 lph
A 300gpd will produce about 37-45lph.
Check that your flush valve is turned to production they come from many suppliers in the flush position.
What is your mains pressure reading on the pressure gauge?
Alex
-
Hi
My mains pressure is 35 psi !!
Forgive my ignorance but should i buy a pump and if so where from i have a ro man 75 Gals a day.
Would the added pump produce 75 Gals a day ??
Regards
Marcus.
-
Well you have found your problem if your pressure is 35psi !
You need a pump, i got mine from www.Gardinerpolesystems.co.uk
It works a treat and delivers 650 litres in 14 hours.
Give them a call.
Best wishes,
Trev
-
i have the 5 stage 100 gpd RO/DI from freedom spoke 2 andrew 2 day he said it could be my water pressure i will find out 2 morrow i hope when i get it test.
-
if your prod is too low, get a pump and upgrade to at least 200gpd, will cost about £70for pump and about £35 for each additional membrane and another £15 for the housing. 75gpd? I USE about 160USgpd, so don't forget the ratings are all USgal=3.78ltrs whereas UKgal=4.545ltrs