Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: S_RICHARDSON on April 03, 2018, 06:43:53 pm
-
Hi everyone,
So I've switched to 2mm pencil jets on my brush head. To get a better flow. 3 infact.
My question is, what connectors do you guys use? (Link?)
My pole is 8mm outer diameter and then it needs to go to 6mm outer diameter jet hose. (x3)
I can only find one's for 2 jets or 4....
Thanks guys
-
Eh ??? You want to use 3 jets ??? Where's the third jet going to go ???
#baffled
-
https://www.youtube.com/watch?v=l2QTd1GBfkQ
Tri jet brush!
-
https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
but then you need
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
to connect to the 8mm pole hose
-
https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
but then you need
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
to connect to the 8mm pole hose
Thanks Paul, that's exactly what I needed
-
Eh ??? You want to use 3 jets ??? Where's the third jet going to go ???
#baffled
Yeah trying out a 3rd jet in the middle of the brush head, see if it makes for a better rinse.
Worth a shot.
-
I fitted 2 x 3mm jets and they been cracking for me, less pointy jet spray bouncing off the windows and a bigger water wave on the window.
Less rinsing too
-
https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
but then you need
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
to connect to the 8mm pole hose
Thanks Paul, that's exactly what I needed
Could just have 8mm OD tubbing to the jets.
No faffing around with a reducer 8mm od to 6mm od.
-
https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
but then you need
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
to connect to the 8mm pole hose
Thanks Paul, that's exactly what I needed
Could just have 8mm OD tubbing to the jets.
No faffing around with a reducer 8mm od to 6mm od.
What 2mm jets take 8mm jet hose? I couldn't find any, hence buying the 2mm jets for 6mm hose...
-
https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
but then you need
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
to connect to the 8mm pole hose
What 2mm jets take 8mm jet hose? I couldn't find any, hence buying the 2mm jets for 6mm hose...
Where your 2mm jets are in the outside diameter is 6mm??
If so you can insert it into a 8mm outside diameter tubbing as the inside diameter is about 6mm.
If it fits loosely just put some duck tape around the 6mm tubbing
Here is a video that explains how we put jets into the tubbing.
START VIDEO AT 28- SECOND MARK
https://youtu.be/tFeQ9xCYSAQ