Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: MisterC on March 11, 2018, 06:52:50 am

Title: Pump Problem
Post by: MisterC on March 11, 2018, 06:52:50 am

I have a fault with one of my pumps, it will work but keeps stopping for a few seconds then starts again.
Does anybody know someone who can diagnose and possibly fix this problem in the  Bournemouth area ?
Thanks for any advice

Title: Re: Pump Problem
Post by: Elfyn on March 11, 2018, 07:40:02 am

More detail needed. What pump? What machine? etc

Title: Re: Pump Problem
Post by: Simon Trapani on March 11, 2018, 07:52:11 am

Do you have a controller fitted? If so re-calibrate it.

Title: Re: Pump Problem
Post by: MisterC on March 13, 2018, 05:29:00 pm

Hi. It's a Brodex system and an Aquatec DDP 5800 pump

Title: Re: Pump Problem
Post by: dazmond on March 13, 2018, 05:51:02 pm

set the CAL higher....

Title: Re: Pump Problem
Post by: Avo on March 15, 2018, 07:19:51 am

This is correct you need to set the calibration as the pressure switch is set to low and cutting off the pump, what you need to do is press the two outside buttons and hold them down until it displays letters CAL then turn it up to your desired settings.