Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jouk45 on June 17, 2006, 11:48:41 am

Title: TIP, TO SUPPORT POLE ON TROLLEY
Post by: jouk45 on June 17, 2006, 11:48:41 am

what  do you guys use to hold your pole on the trolley to save you carrying it,   this is what i do,   i use metal spring clips,   you drill a hole on the side,  almost near the top,   then use the right size self taping screw  to keep the pole from sliping or moving,   for the bottom bar, i use a rubber door stop with the hole in it, again use a self taping screw to hold it in place,

SCREW THE SPRING CLIP ON THE BAR NEAR THE TOP,
(http://i38.photobucket.com/albums/e148/jouk45/DT274.jpg)


PLACE THIS RUBBER DOOR STOP ON BOTTOM BAR FOR TO PUT POLE BASE INTO.
(http://i38.photobucket.com/albums/e148/jouk45/585031.jpg)
MAKE SURE THE SPRING CLIP AND RUBBER STOP ARE BOTH IN A STRAIGHT LINE, HOPE THAT HELPS ANYONE BUILDING THEIR OWN TROLLEY SYSTEM,

Title: Re: TIP, TO SUPPORT POLE ON TROLLEY
Post by: dai on June 17, 2006, 04:39:49 pm

I use 4 of the 5 section Unger pole. About 18 inches of waste pipe held on by exhaust U clamps does the job for me. Just put a bolt through the bottom of it to stop your pole falling though. I have one each side. Dai