Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ants on October 22, 2017, 01:59:15 pm

Title: PS Switch problem
Post by: ants on October 22, 2017, 01:59:15 pm

One of my controllers suddenly started displaying  PS, and the pump wouldn't run.
 After reading essays about how to get the pump going again....
I found the solution was to disconnect and then reconnect the negative battery terminal.!!!!??.just saying  ;D
Hope this helps someone in future

Title: Re: PS Switch problem
Post by: PHILIP HARDY on October 22, 2017, 07:45:24 pm

One of mine (it is the split relay battery charger one), occaisionally does the same, I have learned to just turn it off for 5 seconds before rebooting and it seems to work fine, I would try this before going to the disconect method.

Title: Re: PS Switch problem
Post by: britishwill on October 22, 2017, 09:40:54 pm

Do you mean P5? That means the pressure switch is faulty.

Title: Re: PS Switch problem
Post by: dazmond on October 23, 2017, 07:05:27 am

Quote from: britishwill on October 22, 2017, 09:40:54 pm

Do you mean P5? That means the pressure switch is faulty.

no it doesnt.it means the pressure switch is activated due to too much pressure build up NOT a faulty pressure switch! ::)roll