Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: ansar@amahmood6.or on August 03, 2017, 07:14:39 pm

Title: Prochem blazer xl
Post by: ansar@amahmood6.or on August 03, 2017, 07:14:39 pm

Hi all can anyone help me with prochem blazer xl I'm not getting any vacum when the machine is idle when I put it on full rev just getting little suction checked all pipes no leaks replaced waste tank gasket still no luck then I tried covering the hole on the machine when Idle no suction still no luck but when on full rev I'm getting suction  but not as much any help or advice  would be appreciated .

Title: Re: Prochem blazer xl
Post by: Bob Allen on August 03, 2017, 09:17:46 pm

Is the Waste pipe tap been left open?

Title: Re: Prochem blazer xl
Post by: Robin Ray on August 03, 2017, 09:23:04 pm

If the waste tap is not open. It the vacuum relief stuck open?

Title: Re: Prochem blazer xl
Post by: ansar@amahmood6.or on August 03, 2017, 09:37:27 pm

I'm not really sure sir just been trying alsorts to sort it out no luck

Title: Re: Prochem blazer xl
Post by: ansar@amahmood6.or on August 03, 2017, 11:57:11 pm

Can I contact any of prochem users via phone on here who can assist me any further

Title: Re: Prochem blazer xl
Post by: ansar@amahmood6.or on August 07, 2017, 07:51:50 pm

Thank you all for your advice I have managed to figure the problem out it was the waste tank lid which was worpped I I have doubled the waste tank gasket and it's done the job just waiting for my new lid to  be made thanks guys