Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: The Jester of Wibbly on July 23, 2017, 10:42:40 pm

Title: Sprayers
Post by: The Jester of Wibbly on July 23, 2017, 10:42:40 pm

What do you guys use as a chemical sprayer to get good reach?

Title: Re: Sprayers
Post by: nathankaye on July 23, 2017, 10:50:06 pm

5 ltr spray pump. Cut the 6mm hose and fit a quick release rectus fitting either end.
Get some pole hose n fit corresponding fittings.
Unger telescopic pole and fit the spray end inside. Run hose through pole to the trigger and attach at bottom of pole.
Then connect all up with the rectus fittings (easy for storage this way) and you can spray directly onto the desired object cutting down drift.

Or for lower down easy to reach areas, a small hand held push pump hozelock. 

Title: Re: Sprayers
Post by: lal on July 24, 2017, 09:40:03 am

 Gardiner BackPack, just connect it to a WFP to administer mixed water & chemical of your choice to fascia Conny roofs etc

 Lal

Title: Re: Sprayers
Post by: paul alan on July 24, 2017, 04:45:04 pm

Just squirt some on the brush

Title: Re: Sprayers
Post by: JandS on July 24, 2017, 06:33:50 pm

Old WFP and brush with spray jets just for chemical spraying, usually TFR, and 6 litre rechargeable electric sprayer or if big enough job the backpack.

Title: Re: Sprayers
Post by: dazmond on July 24, 2017, 07:24:22 pm

backpack if its a large dirty f/s/g job.i usually use a 5l pressure sprayer for conny roofs/dirty first cleans though.

i also have a hand sprayer for spraying directly on my brush too.