Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: burky-boy on June 28, 2017, 08:19:14 pm

Title: Pump problem
Post by: burky-boy on June 28, 2017, 08:19:14 pm

Anybody have this problem the pump keeps losing pressure. I thought they could be some obstruction in the 6m hose. I have disconnected the hose before it goes  to the reel and no change in pressure. I then removed the series 26 fitting at the end of the hose and presssure is fine. I only have this problem when the pole is connected I have also removed the brush head but problem still there. Also tried other poles and same  video below
https://www.facebook.com/www.pcwc.co.uk/videos/1560020434031975/

Title: Re: Pump problem
Post by: Don Kee on June 28, 2017, 08:51:45 pm

Recallibrate your controller

(i reckon we should do a tally for how many times this suggestion solves people problems every year...)

Title: Re: Pump problem
Post by: burky-boy on June 28, 2017, 09:11:53 pm

Thanks I will try that

Title: Re: Pump problem
Post by: p1w1 on June 29, 2017, 11:55:33 am

And check your strainer if you have one