Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Terry A on April 21, 2017, 09:00:59 am
-
I have a 40 inch membrane with pre filters and a decent booster pump
The Tds after the membrane is still fairly low so it's not knackered.
I'm getting 1 litre a minute with the pump running at about100 psi.
I'd be interested to know what everyone else is getting from a 40 inch R/O.
Thanks
Terry
-
HF5 membrane, 4 1/2 years old, 50 psi tap water pressure, no booster, 2 x 20" prefilters one sediment and one Fiberdyne carbon block, 2 lpm pure with 2 lpm waste. Membrane running at 98% efficiency.
-
2 40x40. In line
Booster Pump
95% rejection at 60 keep 40 down the drain
We get about 450-500 litre an hour
After r/o it's between 003-008
Just had to replace one today as it was over year old and tds was creeping up to about 18-25
-
450 - 500 an hour is fantastic
Mine takes all day to do 500
Thanks for the replies
Where did u get ur system from?
-
I must have the best system on here .....2 x 50gpd units not boosted 085 ppm in 000ppm out , giving me a whopping 300L in 24 hours , good job im lazy as i might have to buy a bigger one ;D
Rich
-
Hi terry
It's just a standard 40/40 from June at gaps water just one for better use with pressure
The booster pump I think most use is the clarks model, it sure which one Gardners selll a similar one so do grippa
I use John guest fittings take pressure well, we have an out 14 window cleaners who Purchase water from us, so it needs to fill quickly