Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ben M on March 22, 2017, 08:39:26 am

Title: univalve installation
Post by: ben M on March 22, 2017, 08:39:26 am
do you need to install an o ring near the brush if you use a gardiner plastic gooseneck? thanks
Title: Re: univalve installation
Post by: p1w1 on March 22, 2017, 08:40:46 am
i didn't and it works fine for me.
Title: Re: univalve installation
Post by: David Beecroft on March 22, 2017, 01:37:38 pm
I didn't use the "O" ring, I just taped the hose to the gooseneck with electrical tape. Works a treat 
Title: Re: univalve installation
Post by: Jamie Thomas on March 22, 2017, 01:53:39 pm
When i fitted mine i adjusted the brush to the maximum angle i would use it at and then crimped the ring tight to the hole where the pole hose comes through the goose neck.
Title: Re: univalve installation
Post by: dazmond on March 22, 2017, 05:55:56 pm
do you need to install an o ring near the brush if you use a gardiner plastic gooseneck? thanks

yes you do.

if you dont itll keep popping off the brush at height.very annoying when your trying to crack on! ::)roll ;D
Title: Re: univalve installation
Post by: robbo333 on March 22, 2017, 06:02:26 pm
I didn't bother with the O ring and it works fine for me (never had a problem).
However, if you angle the brush to less than 45 degrees, then it can pop out.