Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: duncan h on February 28, 2017, 07:16:20 pm
-
What size is the t connector on the brush heads. One one ebay but it says 8mm 6mm 6mm
one on ex ceed site says 8mm.
My gardiner one says the number 9 on 2 sides. Other side came out
-
The gardiner pole hose is 8mm od with 5mm id. So u want ur fittings to be 8mm.
-
It all depends on the pole hose, mostly this is 8mm.
Then it depends on the brush and the size of the jets or fan jets that you use.
Best answer, use a tape measure or a ruler and see what size jet hose you have. Easy really
-
What size is the t connector on the brush heads. One one ebay but it says 8mm 6mm 6mm
one on ex ceed site says 8mm.
My gardiner one says the number 9 on 2 sides. Other side came out
If it's a gardiner brush or pole, phone gardiner they are very helpful.
-
14mm
-
If you have a Gardiner brush then it'll be 8x6x6mm as they use 6mm OD hose for the brush jets. At least all mine do. My only other brush is an X-Line and that uses 8x8x8mm